AgOpenGPS
  • ๐ŸšœSTART HERE
  • ๐Ÿค“Starters Guide
    • What to buy
      • TL;DR - cut to the chase, what do I BUY???
      • Choosing and ordering a board - standard or micro?
      • GPS modules - standard or micro?
      • Choosing an antenna
      • Connectors
      • Teensy 4.1
      • Cytron motor driver
      • Wheel Angle Sensor
      • IMU (inertial measurement unit)
      • Miscellaneous
      • Tablet
      • The motor
      • Motor? Nah - hydraulic please!
      • Motor/hyd? Nah.. CANbus please!
      • Other guides and resources
  • ๐Ÿ’ชPutting it all together
    • Assembling the board
      • Components you can do without
      • Electrical testing and validation
    • Configuring the ZED-F9P
    • Configuring the Teensy
    • Configuring your tablet
      • Downloading the software
      • Connecting tablet to board
  • ๐ŸคฉAgOpenGPS - a guide for machine-users
    • aka "the manual"
  • ๐ŸคฏFrequently Asked Questions
    • Frequently Asked Questions
      • Help! I need to speak to someone!
      • Placeholder for FAQ categories
      • AGIO
        • UDP
        • RTK/NTRIP corrections
        • Serial/COM ports
        • AgIO and AgOpenGPS - networking
      • AgOpenGPS
        • Is AGIO running? AgIO?
      • U-blox F9P
        • Firmware and configuration fails
        • VTG?
        • Baud rates?
        • U-Center?
      • Teensy 4.1
        • Swapping GPS ports
      • PCB
        • PCBv2
        • PANDA
          • $PANDA ?
          • $PAOGI ?
        • All-in-one boards
          • Standard board
          • Micro board
  • ๐ŸคฌProblems and Solutions
    • Problems and Solutions
      • U-Center can't update the F9P firmware
Powered by GitBook
On this page

Was this helpful?

  1. Putting it all together

Configuring the ZED-F9P

PreviousElectrical testing and validationNextConfiguring the Teensy

Last updated 2 years ago

Was this helpful?

How to configure your ZED-F9P

When you receive your GPS controllers, they'll have a basic configuration on it - but it's likely not optimal for what AgOpenGPS needs. What they need is their own configuration file uploaded.

The choice of file will depend on whether you're going for single or dual GPS.

You'll find the files in your AgOpenGPS Support/UBloxF9PConfigurations folder, but you can also get them here:

The first thing we'll do is update them to firmware 3.2. For this, you'll either be using a micro USB cable to the AOG board (with the chip inserted but the board powered OFF) if you have the Micro board, to each chip in turn. If you're using the standard board, you can just USB it onto your PC without the AOG board.

๐Ÿ’ช
AgOpenGPS/Support/Ublox F9P Configurations at master ยท farmerbriantee/AgOpenGPSGitHub
Logo