AgOpenGPS
  • 🚜START HERE
  • 🤓Starters Guide
    • What to buy
      • TL;DR - cut to the chase, what do I BUY???
      • Choosing and ordering a board - standard or micro?
      • GPS modules - standard or micro?
      • Choosing an antenna
      • Connectors
      • Teensy 4.1
      • Cytron motor driver
      • Wheel Angle Sensor
      • IMU (inertial measurement unit)
      • Miscellaneous
      • Tablet
      • The motor
      • Motor? Nah - hydraulic please!
      • Motor/hyd? Nah.. CANbus please!
      • Other guides and resources
  • 💪Putting it all together
    • Assembling the board
      • Components you can do without
      • Electrical testing and validation
    • Configuring the ZED-F9P
    • Configuring the Teensy
    • Configuring your tablet
      • Downloading the software
      • Connecting tablet to board
  • 🤩AgOpenGPS - a guide for machine-users
    • aka "the manual"
  • 🤯Frequently Asked Questions
    • Frequently Asked Questions
      • Help! I need to speak to someone!
      • Placeholder for FAQ categories
      • AGIO
        • UDP
        • RTK/NTRIP corrections
        • Serial/COM ports
        • AgIO and AgOpenGPS - networking
      • AgOpenGPS
        • Is AGIO running? AgIO?
      • U-blox F9P
        • Firmware and configuration fails
        • VTG?
        • Baud rates?
        • U-Center?
      • Teensy 4.1
        • Swapping GPS ports
      • PCB
        • PCBv2
        • PANDA
          • $PANDA ?
          • $PAOGI ?
        • All-in-one boards
          • Standard board
          • Micro board
  • 🤬Problems and Solutions
    • Problems and Solutions
      • U-Center can't update the F9P firmware
Powered by GitBook
On this page

Was this helpful?

  1. Starters Guide
  2. What to buy

Tablet

You want a tablet that's rugged and has a screen that won't be impaired in direct sunlight. The Panasonic Toughpad range can be bought very cheaply, refurbished, on ebay.

Look for one with at least 8gb memory, preferably an SSD hard drive and if you can find one with built-in ethernet all the better (otherwise you'll need a USB dongle to connect it to the AOG board). Ideally, an HD screen (1920x1080) would be good, but the standard 1366x768 is still OK for AOG.

Make sure it has wifi for tethering to your phone, or USB for a hard-tether if not (preferably not of course).

MOST IMPORTANTLY - it must be a WINDOWS tablet. Android will NOT work. The version of Windows isn't important, 10 or 11 will be fine.

Make sure you get a charger, and you may need to go looking for a 12V charger as well of course (unless your machine has a 110/240V inverter?). If you find the right seller, you can even claim the VAT back.

Models of note:

  • CF-D1

  • GZ-G1

  • FZ-M1

Models to STAY AWAY FROM

  • FZ-A1 (android, no use!)

TODO: crossover cables for ethernet

PreviousMiscellaneousNextThe motor

Last updated 2 years ago

Was this helpful?

🤓